« previous next »
Pages: 1 [2]   Go Down

Author Topic: 401 Stove Restoration  (Read 17785 times)

Offline Cheryl Watson

  • Administrator
  • Regular member
  • *****
  • Posts: 8979
  • Karma: +2/-1
  • The HersheyPark Kitty
Re: 401 Stove Restoration
« Reply #20 on: February 26, 2015, 07:26:33 PM »

Dominic, you may need to post a few pics of the orifice on your stove, as there are different ones.

This thread might help also...

http://www.wagnerandgriswold.org/Attachments/CR1335723483.pdf
Logged

Offline Cheryl Watson

  • Administrator
  • Regular member
  • *****
  • Posts: 8979
  • Karma: +2/-1
  • The HersheyPark Kitty
Re: 401 Stove Restoration
« Reply #21 on: February 26, 2015, 07:37:53 PM »
Here is another thread... scroll down a bit for some helpful discussion:

http://www.griswoldandwagner.com/cgi-bin/yabb/YaBB.pl?num=1276646763/all
Logged

Offline Cheryl Watson

  • Administrator
  • Regular member
  • *****
  • Posts: 8979
  • Karma: +2/-1
  • The HersheyPark Kitty
Re: 401 Stove Restoration
« Reply #22 on: February 26, 2015, 07:42:47 PM »
Another:

http://www.griswoldandwagner.com/cgi-bin/yabb/YaBB.pl?num=1273973497/all


Looking at the Griswold catalogs, the 603 Series of stoves were only fitted to burn Natural Gas, so you will need a regulator... but I am not a stove expert, for sure.... 
Logged

Offline Grant Whipp

  • Regular member
  • *
  • Posts: 3
  • Karma: +0/-0
  • WAGS: The heartbeat of cast iron collecting.
Re: 401 Stove Restoration
« Reply #23 on: March 01, 2015, 04:46:31 PM »
Greetings, All!
A wealth of information, here ... Thanks!
I have what appears to be an 800 series Griswold 2-burner stove in really good shape, all plumbed in and mounted in the back of a vintage 1947 Ken-Skill teardrop camping trailer ... the problem I am having is that the right burner is burning just fine with short yellow-tipped blue flame, reasonably adjustable, and the left burner has BIG yellow flames that the air adjust has little-to-no affect on. Since the orifices on the burner and all the plumbing are clean, I'm assuming that the valve itself needs to be cleaned and/or rebuilt ... if I'm missing something, please let me know before I tear into this thing, or worse, blow the trailer up ... :o ...!
Thanks, and ...
CHEERS!
Logged

Offline Gary Salsman

  • Regular member
  • *
  • Posts: 276
  • Karma: +0/-0
  • WAGS: Heartbeat of Cast Iron Cookware Collecting
Re: 401 Stove Restoration
« Reply #24 on: September 20, 2016, 02:42:34 PM »

I'm wondering if powdercoating would hold up better than paint.
Has anyone tried it?
Logged
Pages: 1 [2]   Go Up
« previous next »