Author Topic: Identify this skillet please...  (Read 1940 times)

Offline Derek Divis

  • Regular member
  • *
  • Posts: 13
  • Karma: +0/-0
  • WAGS: The heartbeat of cast iron collecting.
Identify this skillet please...
« on: January 19, 2014, 09:35:26 AM »
Came across this skillet.  They said it's been in the family for a long time and it's 15".  I was told no other markings or brand.  Can anyone identify a brand and fair price to pay?

Offline Larry Pesek

  • WAGS member
  • Regular member
  • *****
  • Posts: 656
  • Karma: +0/-0
  • Mmmmm.....
Re: Identify this skillet please...
« Reply #1 on: January 19, 2014, 09:41:40 AM »
[size=12]BSR?   [smiley=undecided.gif]

Need more pictures...  especially of the bottom...  including handle...

Looks like a nice user if not warped or bowed...

~Larry~[/size]

Offline Dwayne Henson

  • Administrator
  • Regular member
  • *****
  • Posts: 6910
  • Karma: +0/-0
  • When the people fear their government, there is
Re: Identify this skillet please...
« Reply #2 on: January 19, 2014, 03:35:02 PM »
Looks BS&R, is there a hole in that assist tab? As far as price not sure.
Experience hath shewn, that even under the best forms of government those entrusted with power have, in time, and by slow operations, perverted it into tyranny.
Thomas Jefferson

Offline Derek Divis

  • Regular member
  • *
  • Posts: 13
  • Karma: +0/-0
  • WAGS: The heartbeat of cast iron collecting.
Re: Identify this skillet please...
« Reply #3 on: January 19, 2014, 06:05:42 PM »
That's the only picture I have.  If I zoom in it appears there might be a hole in the tab.  It's listed for $30.

Offline Dwayne Henson

  • Administrator
  • Regular member
  • *****
  • Posts: 6910
  • Karma: +0/-0
  • When the people fear their government, there is
Re: Identify this skillet please...
« Reply #4 on: January 19, 2014, 06:35:36 PM »
I'd check it over very closely, as these big ole monsters did get dropped occasionally, and might have a crack. I will usually go out into the bright sunlight and look all the way around, inside and outside of the side wall. Paying particular attention to around the handle and the area directly a cross from the handle. Then I look over the cooking surface, both sides. Now a older user can have some funky textures caked on it, so remember that cracks will be on both sides, not just on the inside or just on the outside, it will be cracked on both. If I think I see a possible crack, on just one side, I'll scrap that area with the trusty pocket knife and see what is under that crud. 30 dollars is a good price for a 14, IMO.
Experience hath shewn, that even under the best forms of government those entrusted with power have, in time, and by slow operations, perverted it into tyranny.
Thomas Jefferson

Offline C. Perry Rapier

  • Regular member
  • *
  • Posts: 26150
  • Karma: +0/-0
Re: Identify this skillet please...
« Reply #5 on: January 19, 2014, 06:42:42 PM »
Yes thirty dollars for a nice big skillet like that, thats cheap. I'll take ten of them for that price.  ;)